Installation Proceedure for our 2pc Fencing Solution

We use this 2pc fencing solution for 95% of all our otter fences.

Select a instruction's thumbnail to enlarge it. 

Step 1

Step 1

Clear the route along the fence line, and level the ground, then knock in the posts in as long and straight runs as possible.

All posts should be UC4 or Class 4 Rated.

Intermediates 3”-4” diameter
Strainers 5”-6” diameter x 2.4m

Step 2

Step 2

Ground skirt should be rolled out in an anti-clockwise direction on the outside of the posts, so the hunge line is nearest the posts.

The outer line then needs to be bent upwards at 90° and tacked to the posts.

Step 3

Step 3

Strain 19/180/5 and drop on top of ground skirt to trap upper wire. Staple off. Hog ring lower line wires.

Step 4

Step 4

Attach brackets from inside gfence, go over hinge line, under main overhang and clip in to keyhole slot at end of brackets. Bolt bracket to post with two bolts.